# | Attribute | Value |
---|---|---|
1. | Deflection function | yes |
2. | Type of product | Torque Wrench |
3. | Weight | 870 g |
4. | maximum torque | 60 N·m |
5. | Socket for plug-in head | 9×12 mm |
6. | Torque measuring accuracy | ±3 % |
7. | Direction of tightening | For right- and left-hand tightening |
8. | Exchangeable tool | Plug-in head |
9. | Torque range | 10 N·m |
10. | Connection format | for plug-in heads (rectangular socket) |
11. | Setting the trigger value | without setting scale (requires torque analyser) |
12. | Feedback | triggering |
13. | Standard | DIN EN ISO 6789 |
14. | Lever length without plug-in head [l1] | 280 mm |
15. | Measurement process | Torque |
16. | Lever length including factory calibration reference dimension [l3] | 305 mm |
17. | Adjusted reference dimension on the torque wrench [l2] | 25 mm |
18. | Reversible reading | Nm |
19. | Adjustable trigger value | preset |
20. | Overall length L | 360 mm |
21. | Trigger principle | mechanical short-travel release |
22. | Calibration | O7 |
23. | Calibration | O7 |
24. | Test certificate | Manufacturer’s test certificate |
25. | Data can be recorded | no |
26. | Measurement technology | mechanical |
27. | Release signalling | haptisk |
28. | Release signalling | haptisk |
29. | EAN/GTIN | 4045197514578 |
30. | brand | GARANT |
Version :
Torque wrench without scale. Wrench setting using torque analyser. The trigger mechanism makes unintentional overtightening extremely unlikely. Anti-clockwise tightening by reversing the plug-in head.
Standard :
Tested to DIN EN ISO 6789.
Application :
For controlled tightening of screws to a pre-set torque during batch productions.
Function :
On reaching the preset torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The long-travel indication gives the user an unmistakable signal that the set torque has been reached.
Note :
Suitable spare jaws No. 657582 - 657950. The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Cutting data :
Legend for drawing and formula: l1 = Lever length without plug-in head l2 = Adjusted reference dimension on the torque wrench l3 = Lever length including factory calibration reference dimension l4 = Reference dimension of the plug-in head L = Total length of the tool T1 = Torque to be set T2 = Specified torque
Accuracy :
±3 % of the set value.